Type CS

The CS combi bedder has the same basis as the Z type, plus an extra bedder and conveyor for distributing extra bedding such as chalk. The extra bedder has a capacity of 50 liter and discharges to the right side. Both the thickness of the bedding layer and the quantity of bedding can be adjusted very precisely. As a result the bedding is distributed very precisely and the use of bedding material can be accurately controlled.

Specifiche:

• Both bedders discharge to the right
• Lama Hardox e striscia antiusura
• Speed (thickness of bedding layer) of conveyors can be adjusted with a control valve
• Quantity of bedding of both bedders is adjustable by means of mechanical metering shutters
• È necessaria una valvola a doppio effetto
• Motori idraulici con giunti elastici e valvola di sicurezza
• Big metering roll at the bottom of the container of the sawdust bedder
• Metering screw at the bottom of the container of the lime bedder
• Sawdust bedder standardly equipped with a metering shutter for distributing small quantities
• Conveyors with sealed edges and scraper
• Motore e secondo rullo rivestiti in gomma
• Finitura: verniciatura a polvere a due strati

Opzioni:

• Second control valve to adjust the rate of both conveyors separately so that the rate (thickness of bedding layer) and the speed of the drive machine are perfectly geared.
• Chalk bedder on the shovel side of the sawdust bedder so that it is also possible to drive forward with a shovel while the chalk is being distributed first.
• Possibility for distribution to the left and the right with the sawdust bedder